Adjustable rear shooting rest11/21/2023 Removing and or flipping them, creates the best width for your stock. These bumpers have a 1mm wall on one side, and a 2mm side on the other. These bumpers are designed so that they can be removed and or rotated to create different widths to somewhat "box in" the sides of the stock. The Stock Platform - The stock platform features (2) vertical walls with seperate TPE (flex material) "bumpers".What this means is if the rear stock moves across the top of the platform, it has a minimal effect on the vertical, point of impact. Bubble Level - Integrated on the Monopod lower case, is a bubble level that when zeroed, orients the top stock platform to a flat position with the horizon.In addition, there are (3) stainless steel leveling screws that allow leveling on irregular, soft surfaces such as wood etc. The Ultrapod rests on (3) rubber feet that resists slipping.The fully extended stock position height is 98mm (3.8"). Ultrapod Travel - The fully retracted stock position height is 46mm (1.8").This reduces the scope's side to side "wobble" commonly seen with "jack screw" type devices. As the elevating ring is rotated, the platform features an integrated steel roller bearing.No more constant resetting of "squeeze bags etc." that need to be completly reset after each shot. Adjusting Height - By rotating the elevating ring, the Monopod can extend/retract to the desired position with excellent precision and after shot repeatability.Please be sure before ordering that a potential 2 hand operation is OK for your style of shooting. The reason for this is the unit is less than 1lb and depending on the wight of the stock it may not be enough to stop the base from rotating. Some customers actually use one hand to both hold the base and also rotate the ring when its in its lower positions. Important Note, 2 handed operation - When rotating the elevating ring in most cases, you will need to lightly hold onto the base momentarily with your other hand as to not have the base rotate.It is an easy to stow device, that replaces "squeeze bags" and fixed rear stock adjustment devices etc. The STUD Ultrapod is a precision elevating device, that allows the bench rest shooter the ultimate in vertical, point of impact point control.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |